How to install Jeep Gladiator LED fender lights

Today we're going to talk about how to replace the halogen Wrangler JL or Gladiator JT front fender lights and running lights?

LED Fender Turn Signal Lights for Jeep Gladiator JT Wrangler JL

These LOYO fender Lights can replace the front DRL and turn signals for a 2018+ Jeep JL and 2022 Jeep Gladiator JT. We manufacture 2 different version of this light that will replace the OEM halogen fender lights and OEM LED fender lights. You can have choice no matter what fender light your Jeep comes with.

The plug-n-play design and only requires basic tools makes them easy to install, and come complete with high-powered LEDs that operate as day time running lights, and high powered amber LEDs that scan for the turn signals. This is going to be about a 40 minute job 20 minutes for each side.

Install fender lights on a Jeep JL

  • Tools you’ll need: Screw driver, Pry Bar, 10mm ratchet or socket with a wrench
  • Step 1: Remove the push clips and bolts on the underside of the fender to remove the fender liner. and gain access to light assembly in the fender. There should be a total of three of those.

How to install jeep fender lights_1

  • Step 2: With the clips and screws removed, simply pull back the fender liner., next, remove the 2 bolts that hold the fender to the jeep and gently separate it a few inches from the body.

Install fender lights on jl or jt_2Install fender lights on jl or jt_3

  • Step 3: Locate the screws that hold the light bracket in place and remove them along with the push clip on the top edge of the bracket, and then, remove the bracket.

Jeep jl fender lightsJeep JL LED fender lights

  • Step 4: Locate the screw on the inner edge that holds the side marker lights into place and remove it.

Jeep fender lights

  • Step 5: Using a pick tool or a small screwdriver release the clip on the connector and unplug the side marker light from the stock harness. Then remove the side light.

led fender lights for jeep jlLED Fender Lights for gladiator JT

  • Step 6: Locate the four screws that hold the DRL light in place and remove them to release the light from the fender.

Jeep jl led fender lights installJeep fender lights with drl and amber turn signal

  • Step 7: Install the LOYO fender lights using the OEM screws and reconnect the power harness making sure to lock the harness into the back of the light to seal it.

Jeep gladiator fender lights

  • Step 8: Install the LOYO side marker using the OEM screw and reconnect the power harness.

Jeep jl fender flare lights

  • At last, please make sure to test the lights before you install the mounting bracket and weather guard on the fender.

Jeep Gladiator Fender Lights | LOYO

A quality LED light replacement that is built to last. Providing for a safer driving experience while turning heads at the same time.

It’s not hard to tell which one’s gonna look a heck of a lot better. Definitely a big improvement over stock. Let’s add unique style and practical function to your Jeep Wrangler JL or Gladiator JT with the LOYO LED Smoked DRL Fender Lights with Sequential Turn Signals.

LED Fender Lights on Jeep JL and Gladiator JL models

The upgrade fender lights have solved the decoding problem to fit more model of JL and JT,  there will be no hyper flashing or turn signal out indications anymore.

Check the list below to see if the lights fit your Jeep, or contact us through the live chat option on the website if you are not sure which to choose.

LED fender lights fitment

LOYO®was established in 2009-the primary focus of becoming a market leader in the automotive parts & accessories industry with the goal of providing high-quality products at competitive prices, great customer service, superior technical support to our customers.
返回博客

发表评论

请注意,评论必须在发布之前获得批准。

Featured collection

1 / 4