LOYO LED Halo Headlights with Amber Turn Signal + LED Halo Fog Lights Kit for 2007-2018 Jeep Wrangler JK

I was surprised with how good these are considering their price point. They look amazing, and update the look of the look of the truck to make it more aggressive and modern.

The light output is phenomenal. Absolutely shattered my expectations. Great distance, spread, and intensity. The high beams are like turning on the sun. Probably the most important safety upgrade I have ever done.

These lights are a game changer both in styling and visibility! I live in the pine barrens so when it’s dark it’s really dark. My stock lights hardly provided me with light. I had to use my light bar all the time when other cars were not around. Not any more, I can see! It seriously doubled what I can see. I recommend upgrading your blinkers when you do this job. Get it all over with in one shot.

Received these today and got them installed with little issue. As many other people have stated, the passenger side light needs to be slightly modified to fit in the stock Jeep headlight receiver. There are three tabs on the light that ensure it does not spin in the headlight housing. I used a Dremel to sand these down a bit so that the light would fit into the housing. The drivers side was fine without adjustment. The DRL were wired into the fuse box (under the hood) and I used M9. No radio interference and no issues with flashing (as of yet, but I will update if issues arise).
These look spectacular. I hope they hold up over a number of years, but we will have to wait and see. For the price they are hard to beat.

The headlights and fog lights are SUPER Bright.

Great light so far, I just finished installing them and it only took about an hour to install. I just did away with the bottom turn signal and cut the wire going to it and hooked it up to these lights.
I did waste about 45 minutes bugging customer service for a wiring diagram that is in the last picture of the product pictures.
It wouldn't be that much for the manufacturer to put a black and white copy of it in with the lights though.

Head lamps look great and are really bright. Lights are plug and play but you will have to wire in DSL and Blinker mode. The headlamps will need the housing notches hand filed down a little bit for proper fit into OEM mount housing. Overall great headlamps!

Bought these a while back and only now got around to put them in. Very simple install. Bright and fit right in. Great value.

Direct bolt on replacing OEM. Just need to purchase wiring separately for DRL function and also for turn signals if want them to work.

Really brightened up my drive. My old ones just were not bright enough. These are nice and bright when needed.

What can I say easy to install and bright. Happy with the lights.

Really bright easy install I did have to grind the housing a little bit to fit but great quality lights

Perfect addition to my jeep-easy install-very bright. Only issue is that the wiring is designed for failure-none of the plugs are sealed and protected from the elements. Plug and play was easy but it didn't say how to wire in the drl's and directionals. I am a mechanic so I could do it easily,also used silicone sealant for the plugs.

Easy install, looks great.

Installed these in 1/2/2020. I did seal them like he said. But no problems so far. I daily drive my Jeep. So they been through Hurricanes and the great Texas Blizzard. They still work just fine. Good investment

These are so bright!, especially compared to the JK headlights. The only complaint was it took longer than I hoped to install. The passenger side light refused to fit the groove on the headlight holder and I had to file the edge of one of the guide bumps on the headlight to get it in.
I also wired the daytime running lights to the fuse box so they turn on whenever the Jeep is running. The kit did not have enough wire for this so I had to buy that, and a fuse tap. I also had to buy wire splices to tap into the turn screen lights.
In the end everything works great and they are super bright. Install took me 2 hours.

Light worked very well super bright on a 08 jeep jk only issue is the light for halo is small so you need small butt connectors or solder them together

These headlights are really bright and they light up the road ahead great. I highly recommend this kit for anyone who wants to be able to see better at night. Because we all know that Jeep stock headlights are not the best.

Please make sure you get the correct harness if using for Hummer H2. The harness makes the headlights plug and play.

Fog lights are a different story. The included harness worked for me and I cut the existing wire off the harness and installed the provided harness.

These are so bright!, especially compared to the JK headlights. The only complaint was it took longer than I hoped to install. The passenger side light refused to fit the groove on the headlight holder and I had to file the edge of one of the guide bumps on the headlight to get it in.
I also wired the daytime running lights to the fuse box so they turn on whenever the Jeep is running. The kit did not have enough wire for this so I had to buy that, and a fuse tap. I also had to buy wire splices to tap into the turn screen lights.
In the end everything works great and they are super bright. Install took me 2 hours.
I recommend them.

Really nice replacement for stock jeep lights

Light up the road 4x brighter than stock 2014 Jeep bulbs. Fog lights are even brighter.

nice and bright, the DRL Rings flash amber with the turn signals. everyone that sees them likes them (2008 Wrangler)

Best bang for your buck lights, they’re bright and are amazing in the fog/rain.

I just finished installing this product - My Halo's all work on the headlights and fog lights. What a difference between these and the standard jeep headlights.. I like that my headlights have turn signals now and my fog lights are so bright - I can actually see pretty good with them on alone. Overall - The wiring was pretty easy - However, I had to go to YouTube to watch a couple of video's to get a better idea on the wiring process. The instructions that came with the headlights were not the greatest, especially on the fog lights side of the install..

Overall - I have a 2016 Jeep Wrangler 4dr Black - All of my windows are tinted dark - the new headlights and fog lights really make it stand out even more.

They are great lights so far. I haven’t had any issues for 3 months now with water or passing cars flashing me. I did cover the seals of the headlights with silicone before install to help protect the seals. As all others have said, passenger side headlight bezel(plastic) needs to be dremelled down so the light sits perfect. As for headlight beam issues, just measure height of stock beams against a wall or garage door before replacing with new headlights. Once completed just adjust new beams to that stock height on wall- bam all set.

I bought these headlights for my 2015 JKU and i absolutely love them. They are very bright, and they light up the road perfectly. I was told I would need to purchase additional wiring to get these to fit, so i did, but the wiring was not needed. Overall, great product for the price. Going on a year with these headlights and I have and no problems.

Nice upgrade to the factory headlamps. These are much much brighter! Only complaint is that the directions were a little vague. On first try, Halos did not work, high beam on Rh side did not work on second. I found a how to video on YouTube and finally got everything working as needed.