LOYO 7" Round LED Headlights with Halo DRL + Amber Turn Signal – DOT & E-Mark Approved for Jeep Wrangler JK/JKU/TJ/CJ

• 6000LM High Beam / 3000LM Low Beam — Philips LED chips, 60W/30W per headlight, 5x brighter than halogen.
• Z-Cut Projector Lens — Sharp beam cutoff for maximum road coverage with zero glare to oncoming traffic.
• White Halo DRL — Activates automatically with ignition as a daytime running light.
• Amber Sequential Turn Signal — Wired via included extension wires, no additional relay required.
• Built-in CANbus EMC Decoder — Eliminates flickering and dashboard error codes out of the box.
• Plug & Play — Includes H4-to-H13 adapters, installs in under 30 minutes, no cutting or splicing.
• DOT SAE + E-Mark Certified — Street-legal in the US and EU, certification codes etched on lens.
• IP67 Waterproof — Die-cast aluminum housing with hard-coated PC lens, sealed for off-road use.
• LHD & RHD Available — Asymmetric beam pattern optimized for your drive side, select at checkout.

• SKU: LY-SS7-001
• Power: 60W/High Beam,30W/Low Beam
• Voltage: 9-16V DC
• LED color: 6000K/White
• Function: High Beam, Low Beam, DRL
• Luminous Flux: 3000LM@ligh beam; 6000LM@high beam
• Housing: Die-Cast Aluminum
• Lens material: PMMA+PC

Will these headlights cause CANbus errors or flickering on my Jeep Wrangler?

• No—these LOYO headlights include a built-in CANbus decoder (EMC anti-interference module) designed specifically to prevent dashboard errors, hyper-flashing, or flickering on most Jeep models (JK/JKU/TJ/CJ). Thousands of similar installs report plug-and-play success with no codes. If you experience rare issues (very old wiring or specific trim), contact support for troubleshooting.

How easy is the installation? Is it truly plug-and-play?

• Yes, 95% of customers install in 30–60 minutes with basic tools (screwdriver, star wrench for retaining rings). Steps overview:
• Remove old headlights (pull grill if needed on JK).
• Plug in the new units (use included H4-to-H13 adapters if your Jeep has H13 plugs).
• Connect turn signal wires (extension wires included).
• Secure and aim. No cutting/splicing required for most JK/TJ/CJ.  Pro tip: Test all functions before fully reassembling.

Do these fit my 2018+ Jeep Wrangler JL or Gladiator?

• They physically fit the 7" round housing, but JL/Gladiator models require a separate 9-inch mounting bracket/adapter ring. Wiring is compatible, but confirm your harness type.

Are these headlights DOT and street-legal in the US and internationally?

• Yes—fully DOT SAE approved (DOT SAR HL P VOR 22 12V) and E-Mark certified (148R-00 0510 & 149R-00 0510) for road use in the US, Europe, and many other regions. The sharp Z-cutoff low beam prevents glare to oncoming drivers, and the halo DRL/amber turn signals meet modern standards. Always aim properly after install to stay compliant.

Will the halo DRL and amber turn signal work properly?

• Yes—the white halo acts as daytime running lights (DRL) when headlights are on (auto-activates with ignition on many Jeeps). The bright amber sequential turn signals activate with your blinker. Both are wired via included extensions—no extra relays needed.

What if the plug doesn't fit my factory harness perfectly?

• Rare fitment issues can occur due to aging factory connectors. If the plug feels tight or doesn't seat fully: Gently clean pins. Some users trim small plastic tabs/slits on the old harness plug (common Jeep JK fix—see YouTube tutorials like "Jeep Wrangler JK LED headlight fitment fix").
  Included adapters help in most cases. Contact us with photos if needed—we offer support.

How bright are these compared to stock halogen headlights?

• About 5x brighter overall: 3,000LM low beam and 6,000LM high beam per side (vs. ~1,000–1,500LM halogen). The 5700K crisp white light improves visibility in fog/rain/trails without excessive glare thanks to the projector-style cutoff.

Do they work on left-hand drive (LHD) and right-hand drive (RHD) vehicles?

• We offer specific variants: Select LHD (standard for US/Canada) or RHD (for UK/Australia/etc.) at checkout. The beam pattern is asymmetric and optimized for the chosen drive side to avoid dazzling oncoming traffic.

Can I use these on other vehicles besides Jeep Wrangler?

• Yes—any vehicle with 7" round sealed-beam headlights (replaces 6014/6015/6016/H6024/PAR56). Popular on: Mazda Miata NA (90–97), Nissan Z cars (70–83), classic Ford Bronco, older Dodge trucks, etc. Always verify housing size and wiring.

Any tips for aiming the headlights after install?

• Park 25 feet from a wall at night, turn on low beams, and adjust so the Z-cutoff line is slightly below horizontal (about 2–4 inches drop over 25 feet). This ensures maximum visibility without blinding others—most users get perfect cutoff right away.