7 Inch King Kong LED Headlight For Jeep JK & JL JT | Pair

7 Inch Jeep Wrangler headlights for JK, JL & JT

• Seven-Inch Round LED Headlights
• 5× Brighter than OEM for Better Visibility and Safer Driving
• 6000LM/60W(High Bean)- 3000LM/30W(Low Beam)
• DOT and CE Certified
• Built-in Anti-flicker Harness
• H4-H13 Wiring Adapter Included, H4 Connector for Easy Installation
• Original C ree Chips, tough die-cast aluminum housing and PC lens
• Above 80,000 hours lifespan, water-proof IP67
• PMMA+PC Lens, die-cast aluminum housing
• 1 year warranty, 30 days free returning.
• Sold as a Pair, Driver and Passenger Side Included
• Give your wrangler's front end a new look with a set of LOYO 7 inch LED Headlight!

Descriptions

• Patented Products. Original designed and made by LOYO®.
• High Quality. Made with original C ree Chips, tough die-cast aluminum housing and PC lens, 50% brighter than other similar 7" headlight. These 7'' led headlights have a life span of up to 80,000 hours.
• High Performance LED Lighting. Featuring premium high output LEDs. These round LED Halo Headlights out put 6000 lumens for the High Beams and 3000 lumens for the Low Beams. The lights could more completely fill the areas from the front bumper of the vehicle out to the cut off, and help you have much better visibility on the sides of the road.
• EASY INSTALLATION H4 to H13 adapters included. No need extra decoder due to built-in anti-flicker harness. Usually need about 20 minutes to install the headlights, just plug and play. Note: It should be noted that the DRL will require additional wiring and fuse tap for operation.
• DOT and E-Mark CERTIFICATION. These LOYO patented 7-inch led King Kong headlights pass DOT and E-Mark certification requirements, are legal on the road for street use.
• Unique Breathing Valve Effectively remove moisture. Waterproof & non-condensing.

Note:

• Headlight bracket is needed if your Jeep model is 2018+ Jeep Wrangler JL & Jeep Gladiator JT. Click--> Jeep Wrangler Headlight Mounting Bracket

Fitment：

• Jeep Wrangler JK 2 Door 2008-2014; 2016-2018
• Jeep Wrangler JK 4 Door 2008-2014; 2016-2018
• Jeep Wrangler JL 2018-2021
• Jeep Wrangler TJ Unlimited/LJ 2003-2005
• Jeep Wrangler TJ 1998-2000; 2002-2005
• Jeep Wrangler CJ-7 1976-1986
• H1&H2 2004-2009 ( H2 needs 9007 male to H4 female adapter, package not included )

Notice and Modify Needed  for Some Models

• 2005 LJ (TJ Unlimited) need file the housing;
• 2006 TJ need light trimming with the Dremel;
• 2012 JK need modify the plastic headlight holder;
• 2017 Wrangler need make some modifications to make it fit;
• 2007 Wrangler need to use H13 (9008) HID Relay (Package not included)
• 2016 Wrangler 75th Anniversary Edition need modify the bezel for the headlight;
• 2013 Wrangler the inner part of the headlight hole had to be elongated for the light to fit;
• For some models like 2016 JK Wranglers. The high beams are staying on and flickering, unless turn on low beams or put the car in park, they just stay on. Solutions: You need an app(JScan) to disable the DRLs in order for the high beams to not be activated as DRLs.
• For some models like 2013 and 2015 Wrangler JK JKU, there’s two locations on each headlight that interferes with the stock headlight plastic housing. It’s on the middle left and right and about 2 inches long. A dremel tool was the most efficient tool to grind away what was needed to have them sit flush. And then the headlights will fit perfectly.
• DO NOT FIT FOR 2007 Wrangler Sahara JK; 2008 JK; 2006 TJ Rubicon; 1997 TJ; 2001 TJ; 1995 AM general H1; 2003 H2; 2016 JK Wrangler Sahara 4 door
• For the Canadian models, You may need to purchase a programmer to turn off the stock DRL function and wire halos to another power source.